Bona Mix&Fill Plus presents a water-based binder with an exceptionally high solids content, perfect for efficiently filling gaps and voids in wooden floors. Typically, only a single application is needed to fill the gaps in a newly installed parquet floor. Ideal for light to medium coloured wood species like oak, beech, pine, maple, and similar, it's suitable for gaps up to 3 mm wide.
Key Features:
- Outstanding filling capability
- Rapid drying
- Water-based yet anti-corrosive (avoids rust stains)
- Very low solvent content
Preparation:
Ensure the floor is properly acclimatized to its intended environment, dry, and free from wax, dirt, and other contaminants. Sand the floor to bare wood, reaching a grit of 60-80 before the final cut. Ensure the room temperature and product temperature stay above +13°C during application and drying.
Application:
- Thoroughly shake the can before use.
- Mix the product in a container with fine, clean wood dust until achieving a smooth consistency.
- Apply the mixture evenly across the entire floor using a stainless steel trowel, repeating the process if necessary.
- Once the surface is dry, sand off any excess Mix&Fill Plus using a belt and edge sander with grit 100-120.
- Treat the floor with any Bona coating system following the respective user instructions.
Brand
- Bona
Size
- 5ltr
Drying Time
- 30 mins - 1 hour
