Experience the benefits of Marldon MXS 160, a water-based, solvent-free epoxy primer designed for porous substrates. This two-part epoxy primer offers exceptional adhesion to a range of surfaces, including concrete, sand/cement, and polymer-modified screeds, including calcium sulfate-based screeding compounds.
Marldon MXS 160 Epoxy Primer for Porous Substrates serves as a breathable sealer for calcium sulfate screeds. Furthermore, it is suitable for priming both new and existing cementitious screeds, concrete surfaces, as well as brick and blockwork. This versatile primer can also be utilized as a low-viscosity base for epoxy paint coatings on properly prepared, power-floated concrete.
Packaging:
Available in two-part kits weighing 7.5 kg each.
- Coverage Rate: Coverage may vary, but typically 10m² per kg, depending on the substrate and the chosen application method.
- Cleaning: Clean up with water immediately after use.
- Storage: Store the product in dry conditions within the temperature range of +10°C to +35°C.
- Shelf Life: Enjoy a shelf life of 12 months when storing the product as recommended, in its original, unopened packaging.
- Health and Safety: Before use, it is essential to read and fully understand the Product Health and Safety Data Sheets provided with the product.
- Marldon
- Water Based,Epoxy
- 7.5kg
- Two-Part
- Anhydrite Screeds
